Housing Terminator ASIC-miner

Housing Terminator ASIC-miner has standardized dimensions and is perfect for installation in any type of server rack 4U, which allows you to collect not its base of super Mining farm. The front of the aluminum enclosure has three kulernyh chrome grille, a network interface such as Ethernet, and standard connector type USB. As for the back cover of the device is placed on it for two grilles, and the remaining space is ventilated as much as possible, which is enough to create an effective air channel device. Also back is a standard interface and the power switch on and off the device.

Asik Looking inside, you'll find a set of six parallel embedded processor boards, internal power supply, set the fan to the blowing and blowing and pre-NIC. With regard to the cooler, then they should pay special attention, because this device uses powerful server model fans Nidec TA4500DC blades with a diameter of 120 mm. Besides coolers cooling system device complements the heat sink mounted on the two pieces of each of the miners working boards.

If a more detailed talk about computing power devices, it should be noted the presence of 60-chip model, set to 8 on each of the boards and made of 28-nanometer technology, and thereby achieved such a high heshreyt Asik Terminator.
As for the power supply of Asik-Miner, here uses a powerful power supply model GameZone GX1300M, calculated on the power consumption of 1100 watts.

⇑ Your Ad Here ⇑

Terminator MINI A2

Outside, Terminator MINI A2 is an elongated black boxes with two additional modules on the upper part of it. The case is built-up construction of separate metal lids that are interconnected by means of bolts. Inside, it's pretty simple: CPU boards arranged in a vertical orientation and only two. Above them, the top cover is a network board and the power board. As for the cooling system, there are two on the cooler blowing and blowing, which are located on the front and back cover of the device and are covered by radial bars. Because the boards are equipped with heat sinks on both sides, the heat in the Terminator MINI A2 is fairly efficient.
As for the heart of the miner, he worked for 16 chips A2 Terminator chip, which met on 28 nm process technology. Thus, each of the two boards is set to 8 miners working chips.
Power required for Terminator MINI A2, is a minimum of 350W and is fed through the two standard 6-pin connectors. Power supply standard is not provided, that is inherent in most of these devices on the market today.
Features of the network connection Asik miners Terminator MINI A2
Unlike many of its competitors, Terminator MINI A2 does not require an external controller to connect to the network. On its upper part has a controller Raspberry Pi, which is popular with most existing today Asik miners and repeatedly had to prove the reliability and stability of their work. So all you have to do - is to connect your Internet cable to the Ethernet-port devices. In addition, thanks to its convenient location RP-controller in the upper part of the body, provide direct access to its memory card.

⇑ Your Ad Here ⇑

ASIC-miner Terminator A2

Housing ASIC-miner Terminator A2 has a standardized size and is perfect for installation in any type of server rack 4U, which allows you to collect not its base of super Mining farm. The front of the aluminum enclosure has three kulernyh chrome grille, a network interface such as Ethernet, and standard connector type USB. As for the back cover of the device is placed on it for two grilles, and the remaining space is ventilated as much as possible, which is enough to create an effective air channel device. Also back is a standard interface and the power switch on and off the device.

Asik Looking inside, you'll find a set of six parallel embedded processor boards, internal power supply, set the fan to the blowing and pre-NIC. With regard to the cooler, then they should pay special attention, because this device uses powerful server model fans Nidec TA4500DC blades with a diameter of 120 mm. Besides coolers cooling system device complements the heat sink mounted on the two pieces of each of the miners working boards.

If a more detailed talk about computing power devices, it should be noted the presence of 48-chip model, set to 8 on each of the boards and made of 28-nanometer technology, and thereby achieved such a high heshreyt Asik Terminator A2.
As for the power supply of Asik-Miner, here uses a powerful power supply model GameZone GX1100M, designed for power consumption in a 1100 W, while the work of the device is sufficient and 750, and watts. If necessary, the device can also be configured and higher productivity, which has required 900 watts.

⇑ Your Ad Here ⇑

Asik-Miner Alchemist 256

Housing Asik-Miner Alchemist 256 is completely made of aluminum, which makes it quite easy for his size. With standardized dimensions, this unit can be easily installed in the server rack, but at the same time it is also perfect for home use.
On the front panel of this Asik are three chrome grilles for cooling coolers, small power button, as well as informative LED-display with a pleasant blue backlight.

The display submitted data about your IP-address, but in the process of hashing it lights up continuously, and dies. If the front of the device there are three coolers in the blowing, then on the back there are also three coolers blow-out that provides excellent airflow and maximize heat transfer from the working board of the device. In addition to the cooling elements back cover is also equipped with 9-th ports power standard PCI-E 8-pin, one of which is designed to supply the control panel, and the remaining eight for each of the embedded processor boards Asik. Well, except for the power of interfaces is also located behind a network port standard Ethernet.

Looking inside the unit, you will find 8 parallel to the installed boards, separated by metal partitions. Each card carries a 32 processor configured to 28-nm technology, which together and provide such a high heshreyt device. We should also mention the interior ergonomics of Asik. All wiring neatly stacked under the metal wall and takes up a minimum of space, without hindering the proper air circulation.
In addition to working boards inside Asik-Miner Alchemist 256 also set a network controller that eliminates the need for additional hardware configuration and allows you to immediately start working with it.

To ensure adequate power is necessary to use an external power source is not less than 2200 watts, and with a voltage of 12 V, as consumption of each of the working board is about 300 watts, and to supply the control panel and the cooling elements are also required additional 130 watts.

⇑ Your Ad Here ⇑

Zeus Thunder X3

Zeus Thunder X3 - a powerful miner for performing Scrypt-hash. This device is characterized in that even with its high performance makes a low level of noise and maintains a low temperature.

Design features:

Externally, Asik miner Zeus Thunder X3 concluded in strict black metal housing, the front of which there are three powerful cooler and the rear wall of the most ventilated, which together provide efficient heat transfer devices. In addition to the grids at the rear is also a standard power socket, switch and socket for connection to the network controller.

Technological equipment miners:

Look inside the miners, you can see four business card placed vertically and equipped with powerful radiators, as well as a built-in power supply 1050 watts. Each of the boards carries a chip on 32, giving a total of 128 chips and the overall speed of the hash in the incredible 28 Ml / s. Zeus Thunder X3 boasts a complete package, which in addition to the power supply also includes a network controller Raspberry Pi.

⇑ Your Ad Here ⇑

Zeus Lightning 40M X6

Zeus Lightning 40M X6 - a high power miner for performing scrypt-hash. This unit is compact and perfect for home use.

Design features miner Zeus Lightning:

The manufacturer of this device made a significant emphasis is on functionality. So, Zeus Lightning enclosed in a rectangular metal case, which is located on the front panel of the cooling of the cooler 3, and on the back - the air vents and the necessary interfaces to connect.
Zeus Lightning default equipped with a power supply at 1200 W, which is more than enough taking into account the average unit energy consumption in 1070 watts. In addition to the power supply, installed in the housing 8 business cards, each of which carries a chip on 32 Zeus. Each board is equipped with a powerful cooler, so such a powerful device does not overheat and maintains temperature control at 33-45 ° C.

Connecting the miners to the network:

There are three ways to connect to the network Zeus Lightning: connection to a PC, connect to the router, and the most usual connection to the network controller Raspberry Pi. RP network controller module is optional and can be switched in the box according to the customer.

⇑ Your Ad Here ⇑

B2 DRAGON Litecoin

B2 DRAGON Litecoin - this is a very popular Asik miner focused on working with Scrypt-hashing algorithm. This device is characterized by low indicators of noise pollution and energy consumption, while providing good performance.

The design and the basic design features miners:

At first glance, Asik miner B2 DRAGON Litecoin very much like a standard home computer system unit. The body is made entirely of metal, which is removable just one of the sides. The front panel bears two chrome grille fans, as well as front-end ports of the device and a set of six red LEDs. The back cover is almost blown. It also has the power socket and switch on / off miners. Well, in order to enliven the design of the device, the manufacturer equipped the back part of the green LED backlight.
After removing the side panel, you can see the four processor modules installed side by side. The manufacturer tried to provide the best-possible removal of heat and set on two powerful radiator on each of the boards. Thus, each module carries a 36 chip B2, made on 55-nanometer technology, which provide heshreyt device 30 mh / s.

In addition to working boards, chassis accommodates a well and power supply 1100 watts, which saves the owner of the device by an independent third-party source of energy research.
It is worth noting the fact that at such high rates of productivity, Asik miner B2 DRAGON Litecoin operate within the temperature not exceeding 35 ° C, while the noise level does not exceed the mark of 52 dB. Given these figures, we can safely say that this Asik is perfect for mining in the home.

Connecting the device to the network and its visual web interface:

Being fully stocked miner, B2 DRAGON Litecoin also equipped with a network controller. This role here assumes a popular unit Raspberry Pi, who faithfully serve the majority of currently existing Asik miners. Here it is firmly fixed in the housing and all of its interface connectors displayed on the front panel of the device.
The user interface of the controller is represented in the form of a browser window, which is accessible by entering the IP-address of the controller into the address bar of any web browser. Software in B2 DRAGON Litecoin based on proven CGMiner and has its own visual shell. Thus, the user access to all the necessary information about the device: the pools involved, working IP-address, mask, gateway, and the display and selection of the operating mode of the device. Among other things, the software keeps track of all vital indicators of miners, including its temperature, the status of each of the four processor modules, the speed and performance of time hashing operation. In general, the interface is very convenient and easy to use.

⇑ Your Ad Here ⇑

Litecoin A2 DRAGON

Litecoin A2 DRAGON - a high-performance Asik miner can carry out SCRYPT-hashing with incredible speed 60mh / s. In addition to high performance, this unit also features fully staffed, so A2 DRAGON is a complete and independent Asik miner.

Appearance and design features Litecoin A2 DRAGON:

Externally, Asik miner A2 DRAGON differs little from most of its direct competitors. All its technical accessories enclosed in a black metal case, the front of which there are two powerful 120 mm cooler and on the perimeter rows of holes are provided, which together ensures a stable operating temperature miners. In addition to the chrome grilles fan, front panel of the device is also equipped with network connectors and red LED indication. At the same time on the back panel has a standard connector and a power on / off button device.

An interesting design feature of the miners is a green light on the back of its lattice, which does not carry any direct functions, but perfectly decorated with the device. Since the very body of the device is sufficiently stretched, removed only one of its cover, but this is more than enough for full access to the entire iron miner. Thus, looking inside this Asik can see four working board mounted in parallel and located fairly close to each other. Each of the boards carries a range of high performance processors A2 models made by 28-nanometrovovmu technological process and for their proper cooling, the boards have a powerful radiators, completely covering the area of the boards themselves.

In addition, within the body can be seen another black box, is an integrated power supply 1050 watts. Given the fact that the average miner power is at 700 W, and the maximum possible consumption equals 1020 W, the power supply allows you to unlock the full potential Asik Litecoin DRAGON.

It should also be noted that with such an impressive performance, the device shows a fairly soft indicators of noise that does not exceed the mark of 52 dB. In addition, providing heshreyt 60 mh / s with a power consumption only 700 W, the miner can be called a very economical device. All of this means that Asik miner A2 DRAGON is an excellent candidate for the role of domestic miners.

Connecting to the network interface and Asik miners Litecoin DRAGON:

As mentioned earlier, Asik DRAGON device is fully stocked, which means that it is also the network controller. There has been a familiar and time-tested network controller Raspberry Pi, is completely integrated into the enclosure. Because of this, on the outside of the unit displayed only the interface ports: Ethernet to connect to the network and 2xUSB maintenance of the controller.
The very same visual interface controller is based on CGMiner and provides all the necessary features for mining in any pools, and track all vital parameters of the device.

⇑ Your Ad Here ⇑

Silverfish Blade 28M

Silverfish Blade 28M is a compact station for Scrypt-heshirvoaniya that is easily capable of providing heshreyt 21 mh / s.

Design and design features miner Silverfish Blade 25M:

Outside the miner is not much different from the vast majority of frameless Asik existing today in the global market. Silverfish Blade 25M is a pair of processor modules connected together by two-cooled coolers. Skeleton design here is a T-shaped metal frame, at the same time playing the role of the base and the front panel Asik. As already mentioned, there are two chip modules, each of which carries a 20 chip type SF300k01, made on 55-nanometer process technology. But for proper heat dissipation, each board is equipped with a powerful radiator.
The power supply is provided in the external TOE cards and is not included in the standard. However, supply interface processor modules - standard (PCIE), so to find the right source of energy not make much effort.

Thanks to the open design Asik, access to its hardware is always open, that not only is convenient during continuous operation, but also have a positive effect on the operating temperature miners. And if you look Silverfish Blade 25M is not particularly unique, its filling is very different from all currently existing miners. Thus, both motherboards are combined rigid rail laid on the base unit, and the network controller is an integrated part of the modules.

Network connectivity and software to ensure miners:

Asik miner Silverfish Blade 21M has no additional network controller, such as Raspberry Pi or BE Controller and yet, Silverfish do not need to connect these devices, being completely self-sufficient network device.
Networking in Silverfish Blade 21M been established directly on its working units, each of which has two Ethernet-port, where one is playing the role of receiver of the information, and the second is required for binding with the second circuit board.
As for software, it is also presented in a completely different light than other devices familiar to us. If most of the miners used solely browser-based interface, the software is presented here as a separate full-fledged program. Because of this, the management Asik Silverfish Blade 21M is a very convenient, simple and intuitive. The program displays all the involved pools, all of the network device configuration, the total time, and provides comprehensive information on the operating characteristics: heshreyt, temperature, frequency of processors, etc.

⇑ Your Ad Here ⇑

Bitcoin Mining

One of the most unique aspects of Bitcoin is that you can generate it through the process of mining, which is something anyone with a computer can do. This is unlike fiat currency which can only be printed by the government. This makes Bitcoin somewhat similar to gold and other precious metals, since they can only be mined, not printed on demand. Bitcoin mining is far different than extracting resources out of the Earth however. Instead it involves your computer solving complex equations. The equations solved during Bitcoin mining are cryptographic hashing functions, which are usually referred to as hashes. Here are some photos Bitcoin Mining farm:

What is a Satoshi?

A Satoshi is the smallest fraction of a Bitcoin that can currently be sent: 0.00000001 BTC, that is, a hundredth of a millionth BTC. Use the Converter to find out how much your balance is worth!

  • 1 Satoshi = 0.00000001 
  • 10 Satoshi = 0.00000010 
  • 100 Satoshi = 0.00000100  = 1 Bit
  • 1,000 Satoshi = 0.00001000 
  • 10,000 Satoshi = 0.00010000 
  • 100,000 Satoshi = 0.00100000  = 1 mBTC
  • 1,000,000 Satoshi = 0.01000000  = 1cBTC
  • 10,000,000 Satoshi = 0.10000000 
  • 100,000,000 Satoshi = 1.00000000 BTC

Who controls the Bitcoin network?

Nobody owns the Bitcoin network much like no one owns the technology behind email or the Internet. Bitcoin transactions are verified by Bitcoin miners. While developers are improving the software they cannot force a change in the Bitcoin protocol because all users are free to choose what software and version they use.

In order to stay compatible with each other, all users need to use software complying with the same rules. Bitcoin can only work correctly with a complete consensus among all users. Therefore, all users and developers have a strong incentive to protect this consensus.

Is Bitcoin really used by people?

Yes. There is a growing number of businesses and individuals using Bitcoin. This includes brick and mortar businesses like restaurants, apartments, law firms, and popular online services such as Namecheap, WordPress, and Reddit. While Bitcoin remains a relatively new phenomenon, it is growing fast. At the end of August 2013, the value of all bitcoins in circulation exceeded US$ 1.5 billion with millions of dollars worth of bitcoins exchanged daily.

Advertise in this spot

Рейтинг@Mail.ru